Kembali ke keluarga Titania

Varian Titania Super I/O

Titania Modbus DI-8 DO-8

8 input digital terpencil. 8 output high-side terlindung. Logik tempatan di edge yang lasak.

Titania memperluas sambungan digital peringkat lapangan melalui I/O Modbus RTU terpencil, logik tempatan dan perlindungan industri untuk automasi teragih.

RS-485 terpencil Pengasingan berbilang domain Kuasa industri 24 VDC

Muat Turun Lembaran Data Terokai keluarga Titania Semak kesesuaian produk

Semak solenoid PWM yang serasi dengan Titania

8Input digital

8Output high-side

RTUModbus + mod tempatan

Pengasingan berbilang domainDomain kuasa, logik, komunikasi dan I/O lapangan yang berasingan meningkatkan imuniti hingar.

Autonomi tempatanLogik perkakasan, penjujukan, annunciation dan mod PWM boleh terus beroperasi secara tempatan.

Perlindungan industriPerlindungan litar pintas, arus lebih, haba, ESD, EFT dan lonjakan menyokong tapak yang mencabar.

Keupayaan utama

Direka untuk kawalan teragih peringkat panel

Titania menggabungkan I/O berketumpatan tinggi, diagnostik dan fungsi edge dalam modul rel DIN yang padat.

8 isolated digital inputs

Dry contact, PNP and NPN field devices with integrated counters and configurable filtering.

8 protected digital outputs

Isolated high-side sourcing outputs for 24 VDC loads, with PWM support and programmable safe values.

Edge computing and local logic

Hardware logic, autonomous sequencing, alarm annunciation and local PWM operating modes.

Industrial electrical protection

Galvanic isolation, reverse-polarity protection, current limiting, thermal shutdown, ESD, EFT and surge protection.

Diagnostics at a glance

System, communication and per-channel input/output LED indications support commissioning and troubleshooting.

Field configurable

Configure address, communication and operating mode through DIP switches and Modbus registers.

Mod operasi boleh dikonfigurasi

Pilih fungsi yang sesuai dengan keperluan kawalan tempatan.

Sahkan pendawaian, penarafan dan kesesuaian akhir dengan lembaran data terkawal terkini sebelum pemasangan.

Mod	Fungsi	Kegunaan lazim
Normal Modbus Slave	Standard Modbus RTU operation using a software-configured slave ID from 1 to 247.	Central PLC, RTU, IPC or SCADA monitoring and control.
Hardware Logic Gates	Per-output input masks support AND, OR, XOR, NAND, NOR and XNOR relationships.	Local interlocks and deterministic field actions independent of routine host polling.
Pattern Matching	Detects a configured 8-bit input pattern with optional polarity inversion for each input.	Machine-state recognition and compact interlock conditions.
Programmable Sequencer	Linear or pendulum sequences with channel mask, step interval, pulse width, inter-sequence delay and repeat control.	Valve sequencing, backwash cycles and repetitive machine actions.
Alarm Annunciator	Selected inputs drive steady or blinking outputs using active-high or active-low logic and a configurable flash interval.	Local panels, stack lights, sirens and machine alarm functions.
PWM / PID Control	Per-channel PWM includes frequency, duty, ramping, hold, minimum and maximum intensity; supported modes add smoothing, noise tolerance and PID auto-tune.	Time-proportional loads, controlled intensity and supported closed-loop applications.
Frequency Simulator	Generates triangle, sawtooth, square or sine frequency patterns between configured limits.	Simulation, test and controlled frequency-output applications.
Safe-State Controller	Programs every output for power-up and communications-loss conditions.	Deterministic recovery and network-failure behaviour.

Spesifikasi teknikal

Sorotan terkawal daripada dokumen TTN-DS-2026-001

Sahkan pendawaian, penarafan dan kesesuaian akhir dengan lembaran data terkawal terkini sebelum pemasangan.

Input digital

8 channels; dry contact, PNP or NPN; 1 kHz maximum input frequency; 32-bit counter per channel; filter selections from Off and 1 microsecond through 100 milliseconds.

Output digital

8 isolated high-side sourcing outputs; 0.7 A continuous per channel; approximately 1.1 A peak/current limit; PWM 1-50 Hz at 1% steps.

Komunikasi

1 x isolated RS-485, 2-wire half duplex; Modbus RTU; 9600, 19200, 38400 and 115200 baud with auto-baud detection; 8N1, 8N2, 8E1 and 8O1.

Power

24 VDC nominal, 19.2 to 28.8 VDC operating range; 2-3 W system consumption excluding external output loads.

Mechanical

161 x 80 x 20 mm; integrated DIN-rail mounting.

Environment

-20 C to +70 C operating; -40 C to +85 C storage; 10-95% RH non-condensing.

Protection

ESD IEC 61000-4-2, EFT IEC 61000-4-4 and surge IEC 61000-4-5 protection levels stated in the controlled datasheet.

Dokumen terkawal semasa

Titania Modbus DI-8 DO-8 Datasheet

ID Dokumen TTN-DS-2026-001 · dikeluarkan 19 Julai 2026

Model produk: Modbus DI-8 DO-8
ID dokumen: TTN-DS-2026-001
Tarikh dokumen: 19 July 2026
Status: Lembaran data semasa yang dibekalkan

Buka PDF Muat Turun Lembaran Data

Sahkan pendawaian, penarafan dan kesesuaian akhir dengan lembaran data terkawal terkini sebelum pemasangan.

Wawasan teknologi

Applying Boolean logic, pattern recognition, timed sequences and annunciation functions within distributed I/O.

Baca lagi

Bincangkan aplikasi Titania anda

Semak jenis input, beban output, logik tempatan, komunikasi, pengasingan dan keperluan kabinet dengan pasukan kami.

+60 12-681 0921 inquiry@tachyonicintelligence.com

Minta Sebut Harga