洞察
Titania Galvanic Isolation: Wiring Remote I/O Without Defeating the Barrier
Titania galvanic isolation separates field I/O, logic, RS-485 and power domains. Apply it correctly through deliberate grounding, shielding and cabinet wiring.
阅读更多洞察
新闻与洞察
从传感器、Super I/O 到边缘计算、协议集成与设备健康分析，我们把物理过程连接至运营仪表板。这种从现场到企业层的完整方法，为客户提供从测量到行动的一致工程路径。
已发布文章78工程洞察
文档请使用产品对应的数据表、手册、应用说明、图纸、软件、固件和证书。使用前请确认文件版本和适用型号。
状态监测持续监测振动与温度，以便更早发现故障并改进维护计划。
集成 I/O数字、模拟及专用 I/O，并支持 Ethernet、现场总线、GSM、GPS 和高速接口。
已发布技术信息
工程方法
水处理、交通运输、棕榈油精炼、燃料库、变电站、制造、设施监测和车辆系统。
洞察
PyXis Persistent Configuration: Safe Save, Reboot and Factory Reset Practice
PyXis persistent configuration needs controlled save, reboot and factory-reset procedures, firmware-matched documentation and verified readback.
阅读更多
洞察
Titania Output Fault Diagnostics: Commissioning Protected 24 VDC Loads
Use Titania output fault diagnostics to commission protected 24 VDC loads, distinguish command state from circuit health and define controlled recovery.
阅读更多
洞察
Bill Gates Warns of a Turbulent AI Transition: What Industrial Teams Should Prepare For
Bill Gates argues AI could bring major gains and major disruption. For industrial teams, the practical response is governance, cybersecurity, workforce transition and measurable deployment.
阅读更多
洞察
PyXis Vibration Filter Settings: High-Pass and Low-Pass Cutoffs Explained
Configure PyXis high-pass and low-pass vibration filters around machine speed, fault frequencies and baseline conditions for more reliable condition monitoring.
阅读更多
洞察
Titania Modbus RTU Commissioning: Auto Baud, Serial Format and Response Delay
Commission Titania Modbus RTU reliably: choose auto or fixed baud, serial format, response delay, slave ID and RS-485 network practices for 8DI/8DO remote I/O.
阅读更多我们可提供的支持
有问题或需要技术协助？
请说明公司、国家、应用、数量、信号类型、协议、安装环境和目标交付日期。