洞察
Titania Device Identity Registers: Commissioning and Replacement Control
Titania device identity registers let engineers verify hardware, firmware, serial data, I/O totals and DIP state before configuration or module replacement.
阅读更多洞察
新闻与洞察
从传感器、Super I/O 到边缘计算、协议集成与设备健康分析，我们把物理过程连接至运营仪表板。这种从现场到企业层的完整方法，为客户提供从测量到行动的一致工程路径。
已发布文章78工程洞察
文档请使用产品对应的数据表、手册、应用说明、图纸、软件、固件和证书。使用前请确认文件版本和适用型号。
状态监测持续监测振动与温度，以便更早发现故障并改进维护计划。
集成 I/O数字、模拟及专用 I/O，并支持 Ethernet、现场总线、GSM、GPS 和高速接口。
已发布技术信息
工程方法
水处理、交通运输、棕榈油精炼、燃料库、变电站、制造、设施监测和车辆系统。
洞察
PyXis Sensor Mounting: M5 Stud or Magnetic Base?
PyXis sensor mounting affects vibration repeatability. Compare the M5 stud and magnetic base options, then control location, axis orientation and cable strain.
阅读更多
洞察
Titania Boolean Logic Commissioning: Masks, Polarity and Pattern Tests
Titania Boolean logic commissioning turns input masks, polarity, gate selection and pattern matching into a controlled, testable output function.
阅读更多
洞察
Titania Sequencer Commissioning: Masks, Timing and Restart Behaviour
Titania sequencer commissioning needs a controlled channel mask, verified timing units, defined loop behaviour and deliberate restart and fault-state tests.
阅读更多
洞察
PyXis Diagnostic Index Commissioning: Qualifying Advanced Vibration Indicators for PLC and SCADA
PyXis diagnostic index commissioning qualifies firmware-dependent vibration indicators for reliable PLC, SCADA and historian trending without treating them as automatic diagnoses.
阅读更多
洞察
PyXis Harmonic Array Integration: Mapping Frequency and Amplitude Data into PLC and SCADA
PyXis harmonic array integration maps 20 frequency and amplitude pairs per axis into PLC, SCADA and historian structures with revision-controlled scaling and timing.
阅读更多我们可提供的支持
有问题或需要技术协助？
请说明公司、国家、应用、数量、信号类型、协议、安装环境和目标交付日期。