Kembali ke keluarga Titania

Varian Titania Super I/O

Titania Modbus DI-8 DO-8

8 input digital terisolasi. 8 output high-side terlindungi. Logika lokal di edge yang keras.

Titania memperluas konektivitas digital tingkat lapangan melalui I/O Modbus RTU terisolasi, logika lokal, dan perlindungan industri untuk otomasi terdistribusi.

RS-485 terisolasi Isolasi multi-domain Daya industri 24 VDC

Unduh Lembar Data Jelajahi keluarga Titania Periksa kesesuaian produk

Periksa solenoid PWM yang kompatibel dengan Titania

8Input digital

8Output high-side

RTUModbus + mode lokal

Isolasi multi-domainDomain daya, logika, komunikasi, dan I/O lapangan yang terpisah meningkatkan kekebalan noise.

Otonomi lokalLogika perangkat keras, sequencing, annunciation, dan mode PWM dapat terus berjalan secara lokal.

Perlindungan industriPerlindungan hubung singkat, arus lebih, termal, ESD, EFT, dan lonjakan mendukung lokasi yang menuntut.

Kemampuan utama

Dirancang untuk kendali terdistribusi tingkat panel

Titania menggabungkan I/O padat, diagnostik, dan fungsi edge dalam modul DIN-rail yang ringkas.

8 isolated digital inputs

Dry contact, PNP and NPN field devices with integrated counters and configurable filtering.

8 protected digital outputs

Isolated high-side sourcing outputs for 24 VDC loads, with PWM support and programmable safe values.

Edge computing and local logic

Hardware logic, autonomous sequencing, alarm annunciation and local PWM operating modes.

Industrial electrical protection

Galvanic isolation, reverse-polarity protection, current limiting, thermal shutdown, ESD, EFT and surge protection.

Diagnostics at a glance

System, communication and per-channel input/output LED indications support commissioning and troubleshooting.

Field configurable

Configure address, communication and operating mode through DIP switches and Modbus registers.

Mode operasi yang dapat dikonfigurasi

Pilih fungsi yang sesuai dengan kebutuhan kendali lokal.

Konfirmasikan pengkabelan, rating, dan kesesuaian akhir terhadap lembar data terkendali terbaru sebelum pemasangan.

Mode	Fungsi	Penggunaan umum
Normal Modbus Slave	Standard Modbus RTU operation using a software-configured slave ID from 1 to 247.	Central PLC, RTU, IPC or SCADA monitoring and control.
Hardware Logic Gates	Per-output input masks support AND, OR, XOR, NAND, NOR and XNOR relationships.	Local interlocks and deterministic field actions independent of routine host polling.
Pattern Matching	Detects a configured 8-bit input pattern with optional polarity inversion for each input.	Machine-state recognition and compact interlock conditions.
Programmable Sequencer	Linear or pendulum sequences with channel mask, step interval, pulse width, inter-sequence delay and repeat control.	Valve sequencing, backwash cycles and repetitive machine actions.
Alarm Annunciator	Selected inputs drive steady or blinking outputs using active-high or active-low logic and a configurable flash interval.	Local panels, stack lights, sirens and machine alarm functions.
PWM / PID Control	Per-channel PWM includes frequency, duty, ramping, hold, minimum and maximum intensity; supported modes add smoothing, noise tolerance and PID auto-tune.	Time-proportional loads, controlled intensity and supported closed-loop applications.
Frequency Simulator	Generates triangle, sawtooth, square or sine frequency patterns between configured limits.	Simulation, test and controlled frequency-output applications.
Safe-State Controller	Programs every output for power-up and communications-loss conditions.	Deterministic recovery and network-failure behaviour.

Spesifikasi teknis

Sorotan terkendali dari dokumen TTN-DS-2026-001

Konfirmasikan pengkabelan, rating, dan kesesuaian akhir terhadap lembar data terkendali terbaru sebelum pemasangan.

Input digital

8 channels; dry contact, PNP or NPN; 1 kHz maximum input frequency; 32-bit counter per channel; filter selections from Off and 1 microsecond through 100 milliseconds.

Output digital

8 isolated high-side sourcing outputs; 0.7 A continuous per channel; approximately 1.1 A peak/current limit; PWM 1-50 Hz at 1% steps.

Komunikasi

1 x isolated RS-485, 2-wire half duplex; Modbus RTU; 9600, 19200, 38400 and 115200 baud with auto-baud detection; 8N1, 8N2, 8E1 and 8O1.

Power

24 VDC nominal, 19.2 to 28.8 VDC operating range; 2-3 W system consumption excluding external output loads.

Mechanical

161 x 80 x 20 mm; integrated DIN-rail mounting.

Environment

-20 C to +70 C operating; -40 C to +85 C storage; 10-95% RH non-condensing.

Protection

ESD IEC 61000-4-2, EFT IEC 61000-4-4 and surge IEC 61000-4-5 protection levels stated in the controlled datasheet.

Dokumen terkendali saat ini

Titania Modbus DI-8 DO-8 Datasheet

ID Dokumen TTN-DS-2026-001 · diterbitkan 19 Juli 2026

Model produk: Modbus DI-8 DO-8
ID dokumen: TTN-DS-2026-001
Tanggal dokumen: 19 July 2026
Status: Lembar data terkini yang disertakan

Buka PDF Unduh Lembar Data

Konfirmasikan pengkabelan, rating, dan kesesuaian akhir terhadap lembar data terkendali terbaru sebelum pemasangan.

Wawasan teknologi

Applying Boolean logic, pattern recognition, timed sequences and annunciation functions within distributed I/O.

Baca selengkapnya

Diskusikan aplikasi Titania Anda

Tinjau jenis input, beban output, logika lokal, komunikasi, isolasi, dan kebutuhan enclosure bersama tim kami.

+60 12-681 0921 inquiry@tachyonicintelligence.com

Minta Penawaran